Login |Register
Product Center
Digital Oscilloscope
SDS1000X-E Series

SDS1000X-E Series Super Phosphor Oscilloscopes    

Big Picture, Click Here.

Product Overview     

SIGLENT’s new SDS1000X-E Super Phosphor Oscilloscopes feature two channel and four channel models. The two channel model is available with a 200 MHz analog bandwidth, a single ADC with a 1 GSa/s maximum sample rate, and a single memory module with 14 Mpts of sample memory. The four channel scope is available in 100 and 200 MHz models and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel has sample rate of 500 MSa/s and a standard record length of 7 Mpts. When only a single channel per ADC is active, the maximum sample rate is 1 GSa/s and the maximum record length is 14 Mpts. For ease -of -use, the most commonly used functions can be accessed with its user- friendly front panel design. 

The SDS1000X-E series employs a new generation of SPO (Super -Phosphor Oscilloscope) technology that provides excellent signal fidelity and performance. The system noise is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The SDS1000X-E also employs a 256-level intensity grading display function and a color temperature display mode not found in other models in this class. SIGLENT’s latest oscilloscope offering supports multiple powerful triggering modes including serial bus triggering. Serial bus decoding for IIC, SPI, UART, CAN, LIN bus types is included. The X-E models also include History waveform recording, and sequential triggering that enable extended waveform recording and analysis. Another powerful addition is the new 1 million point FFT math function that gives the SDS1000X-E very high frequency resolution when observing signal spectra. The new digital design also includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response. The features and performance of SIGLENT’s new SDS1000X-E cannot be matched anywhere else in this price class.

The four channel series includes even more functions, including: searching and navigating, on-screen Bode plot, 16 digital channels (Option), an external USB powered 25 MHz AWG module (Option), a USB WIFI adapter (Option), and an embedded application that allows remote control via web browser.

Key Features

◆ 100 MHz, 200 MHz bandwidth models

◆ Two channel series have one 1 GSa/s ADC, four channel series have two 1 GSa/s ADCs. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has sample rate of 1 GSa/s

◆ The newest generation of SPO technology

   ◆ Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)

   ◆ Supports 256-level intensity grading and color display modes 

   ◆ Record length up to 14 Mpts

   ◆  Digital trigger system

◆ Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern

◆ Serial bus triggering and decoding (Standard), supports protocols IIC, SPI, UART, RS232, CAN, LIN

◆ Video trigger, supports HDTV

◆ Low background noisewith voltage scales from 500 μV/div to 10 V/div

10 types of one-button shortcuts, supports Auto Setup, Default, Cursors, Measure, Roll, History, Display/Persist, Clear Sweep, Zoom and Print

Segmented acquisition (Sequence) mode, divides the maximum record length into multiple segments (up to 80,000), according to trigger conditions set by the user, with a very small dead time segment to capture the qualifying event.

◆ History waveform record (History) function, maximum recorded waveform length is 80,000 frames.

◆ Automatic measurement function for 38 parameters as well as Measurement Statistics, Zoom, Gating, Math, History and Reference functions

◆ 1 Mpts FFT

◆ Math and measurement functions use all sampled data points (up to 14 Mpts)

◆ Math functions (FFT, addition, subtraction, multiplication,division, integration, differential, square root)
◆ Security Erase modePreset key can be customized for user settings or factory “defaults”

 Security Erase mode

 High Speed hardware based Pass/ Fail function

MSO, 16 digital channels (four channel series only, option)

Bode plot (four channel series only)

Search and navigate (four channel series only)

◆ USB AWG module (four channel series only, option)

◆ USB WIFI adapter (four channel series only, option)

◆ Web Browser based control (four channel series only)

◆ Large 7 inch TFT -LCD display with 800 * 480 resolution

◆ Multiple interface types: USB Host, USB Device (USB -TMC), LAN Pass / Fail, Trigger Out

◆ Supports SCPI remote control commands

◆ Supports Multi-language display and embedded online help


7 inch TFT-LCD display and 10 one-button menus

Front panel of the four channel series


Front panel of the two channel series

• 7 -inch TFT -LCD display with 800 * 480 resolution 

• Most commonly used functions are accessible using 10 different one-button operation keys: Auto Setup, Default, Cursor, Measure, Roll, History, Persist, Clear Sweep, Zoom, Print

When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per pair is active, that channel has sample rate of 1 GSa/s

The four channel series has two 1 GSa/s ADC chips (channel 1 and 2 share one, channel 3 and 4 share another), so that each channel can achieve sample rates up to 500 MSa/and work on bandwidths of 200 MHz when all channels are enabled.

Record Length of Up to 14 Mpts (single channel/pair mode), 7 Mpts/CH (two channels/ pair mode)


Waveform Capture Rate Up to 400,000 wfm/s


Using hardware-based Zoom technologies and max record length of up to 14 Mpts, users are able to oversample to capture for longer time periods at higher resolution and use the zoom feature to see more details within each signal.


With a waveform capture rate of up to 400,000 wfm/s (sequence mode), the oscilloscope can easily capture the unusual or low-probability events.

256 -Level Intensity Grading and Color Temperature Display

SPO display technology provides for fast refresh rates. The resulting intensity-graded trace is brighter for events that occur with more frequency and dims when the events occur with less frequency. 

           The color temperature display is similar to the intensity-graded trace function, but the trace occurrence is represented by different colors (color “temperature”) as opposed to changes in the intensity of one color. Red colors represents the more frequent events, while blue is used to mark points that occur lest frequently

Serial Bus Decoding Function (Standard)

History Waveforms (History) Mode and Segmented Acquisition (Sequence)


SDS1000X-E displays the decoding through the events list. Bus protocol information can be quickly and intuitively displayed in a tabular format.

Playback the latest triggered events using the history function. Segmented memory collection will store trigger events into multiple (Up to 80,000) memory segments, each segment will store triggered waveforms and timestamp each frame.

True measurement to 14 M points

Gate and Zoom Measurement

At any one timebase, SDS1000X-E can measure using all 14 M sample points. This ensures the accuracy of measurements while the math coprocessor decreases measurement time and increases ease-of-use.

Through Gate and Zoom measurement, the user can specify an arbitrary interval of waveform data analysis and statistics. This helps avoid measurement errors that can be caused by invalid or extraneous data, greatly enhancing the measurements’ validity and flexibility.

1 M points FFT

Hardware-Based High Speed Pass/ Fail function

The new math co-processor enables FFT analysis of incoming signals using up to 1 M samples per waveform. This provides high frequency resolution with a fast refresh rate. The FFT function also supports a variety of window functions so that it can adapt to different spectrum measurement needs.


The SDS1000X-E utilizes a hardware-based Pass/Fail function, performing up to 40,000 Pass / Fail decisions each second. Easily generate user defined test templates provide trace mask comparison making it suitable for long-term signal monitoring or automated production line testing.

Customizable Default Key

16 Digital Channels/MSO (four channel series only, option)


The current parameters of the oscilloscope can be preset to Default Key through the Save menu.


16 digital channels enables users to acquire and trigger on the waveforms then analyze the pattern, simultaneously with one instrument.

Search and Navigate (four channel series only)

The SDS1000X-E can search events specified by the user in a frame. It can also navigate by time (delay position) and historical frames.

Bode Plot (four channel series only)


SDS1000X-E can control the USB AWG module, control an independent SIGLENT SDG instrument, scan an object’s amplitude and phase frequency response, and display the data as a Bode Plot. It can also show the result lists, and export the data to a USB disk.

USB WIFI Adapter (four channel series only, option)

USB 25 MHz AWG Module (four channel series only, option)

WiFi control of instrumentation can provide a convenient and safe method of configuring and collecting data. This new feature works with a SIGLENT approved WiFi adapter to provide wireless control and communications with SIGLENT 4 channel scopes. The adapter must be supplied by Siglent to ensure working.

           The four channel series supports a USB 25 MHz function/arbitrary waveform generator that is operated from the USB host connection. Functions include Sine, Square, Ramp, Pulse, Noise, DC and 45 built-in waveforms. The arbitrary waveforms can be accessed and edited by the SIGLENT EasyWave PC software.

Complete Connectivity

Back panel of the four channel series

Back panel of the two channel series

SDS1000X -E supports USB Host, USB Device (USB -TMC), LAN(VXI -11), Pass/Fail and Trigger Out

Web control (four channel series only)

With the new embedded web server, users can control the 4 channel scopes from a simple web page. This provides wonderful remote troubleshooting and monitoring capabilities.

Ordering Information

Product Name
SDS1000X-E Series Digital Oscilloscope

SDS1104X-E 100 MHz Four Channels

SDS1204X-E 200 MHz Four Channels

SDS1202X-E 200 MHz Two Channels

Standard Accessories
USB Cable -1

Quick Start -1

Passive Probe -4/2

Certification -1

Power Cord -1

Optional Accessories
16 Channels MSO Software (four channel series only) 
16 Channels Logic Analyzer (four channel series only)
AWG Software (four channel series only) 
USB AWG Module Hardware (four channel series only) 
WIFI Software (four channel series only) 
USB WIFI Adapter (four channel series only)
Isolated Front End 
STB Demo Source
High Voltage Probe
Current Probes
CP4020/CP4050/CP4070/CP4070A/CP5030/CP5030A/ CP5150/CP5500
Differential Probes

For detailed specifications, please refer to 《SDS1000X-E Series Super Phosphor Oscilloscopes Datasheet

SeriesBandwidthChannels  Real time
sampling rate
Capture rateMemory depthPrice(Without Tax)
200 MHz 4 1 GSa/s 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) 7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) $ 759
100 MHz 4 1 GSa/s 100,000 wfm/s (normal mode), 400,000 wfm/s (sequence mode) 7 Mpts/CH (not interleave mode); 14 Mpts/CH (interleave mode) $ 499
200 MHz 2+EXT 1 GSa/s 100000 wfm/s (Normal Mode),400000 wfm/s (Sequence mode) 14 Mpts $ 379

Address:      6557 Cochran Rd Solon, Ohio 44139                        Shenzhen ICP 09076277 © 2015 

                                             Google+  SIGLENT website -- International